NetPA Ultra Series • Installation
Rack Mounting
The NetPA Ultra Series amplifiers can be mounted onto a rack using one of the following methods.
NOTE:
The following figures show the NetPA U 1004 being installed; however, both NetPA Ultra
Series amplifiers are installed in the same way.
Rack Ear Mounting
The NetPA Ultra Series amplifiers ship with a set of rack ears, so that the half rack-width amplifiers can
be installed in a full rack-width space.
Mount the amplifier with the rack ears by doing the following:
1.
Remove the rubber feet from the bottom of the amplifier if previously installed.
2.
Attach the included rack ears (one long and one short) to the sides of the amplifier with the four
provided #6 machine screws (
1
).
Figure 1.
Installing Rack Ears onto the NetPA U 1004
3.
Insert the amplifier into the rack and align the holes in the rack ear with the holes on the rack.
4.
Secure the amplifier to the rack using the four provided 10-32 x 3/4” screws (see figure 2,
2
).
Figure 2.
Securing Rack to NetPA U 1004
Rack Ear Mounting
5
e
NetP
A U
1004
SER
IES
1
2
3
4
OVER
TEM
P
LIMIT
ER/P
ROTE
CT
SIGN
AL
POW
ER AM
PLIF
IERS
2
Net
P
e
NetP
A U
100
4 Se
ries
1
2
3
4
OVER
TEMP
LIMI
TER/P
ROTEC
T
SIGN
AL
POW
ER A
MPL
IFIER
S
1
POW
ER AM
PLIF
IERS
Net
P
POW
ER AM
PLIF
IERS
Net
P
POW
ER AM
PLIF
IERS
Net
P
