NetPA Ultra Series • Operation
2.
This variable specifies which port to direct the responses.
3.
This is useful when you need to keep traffic to a minimum on a particular port
or ports.
4.
When listening over the Dante port, a DMP Plus Series device is needed to
facilitate communication between the amplifier and control system.
•
Amplifier must be in verbose 3.
•
Connection to DMP/XMP must be in verbose 3.
•
The connection must be maintained.
•
The following command is used to configure the DMP to listen to the
amplifier.
a.
E
C
X!
*
X@
EXPR
}
b.
X!
: Dante device name
c.
X@
: 0 = off, 1 = on
NOTE:
For additional information about Dante format, please see either the DMP Plus
or XMP 240 User Guides available at
www.extron.com
.
Group Masters
Presets
Monitoring Configuration
23
