NetPA Ultra Series • DSP Configurator Software
7
Filters Help Button
—
(see
figure 51
on page 37)
Opens the
About Filters
topic in
the
DSP Configurator Help
File
. This help file topic discusses each filter type in greater
detail.
Input Dynamics Blocks
Double-click the
Dynamics
block to open the dynamics drop-down list.
Figure 53.
Dynamics Block and Drop-Down Menu
From the
Dynamics
drop-down list, two types of dynamics processors are available. Select
a dynamics processor type to insert it into the
Dynamics
block.
There is one
Dynamics
block available per mic/line input channel. Each block can be
configured with any of the processor types.
The two types of dynamics processors available are:
•
Compressor
on page 39.
•
Limiter
on page 40.
Once a dynamics processor is inserted, double-click the dynamics block icon
(as seen on the right) to open the corresponding dialog box.
If a dynamics processor has been inserted and needs to be changed to a different dynamics
processor, right-click the dynamics block, hover over
Insert
, and select a new processor
to insert it (see figure 54).
Figure 54.
Changing Dynamics Processors
Input Dynamics Blocks
figure 16.
Dynamics Block and Drop Down Menu
figure 17.
Changing Dynamics Processor
38
