NetPA Ultra Series • DSP Configurator Software
Line/AT Outputs (NetPA U 1004)
In the NetPA U 1004, four outputs are available in the
Line and AT Outputs
panel and route
signals to the four balanced/unbalanced line level outputs as well as the four AT outputs.
Signals routed to these outputs are also transmitted on the Dante network.
Figure 70.
Outputs Panel for the NetPA U 1004
Line/AT Outputs (NetPA U 1002)
The NetPA U 1002 has two separate channels for the line outputs and two separate
channels for the AT outputs. Each output has to be routed to individually.
Figure 71.
Outputs Panel
Naming an Output
1.
Click the output name field.
Figure 72.
Output Name Field
2.
Delete the text and type the desired output name.
Figure 73.
New Output Name
3.
Press the <
Enter
> key or navigate away from the field to confirm and apply the new
output name. Press the <
Down Arrow
> key to navigate to and highlight the next name
field.
Figure 74.
Renamed Output
NOTE:
Follow the same procedure to edit an Output name.
Line/AT Outputs
figure 32.
Outputs Panel
figure 33.
Output Name Field
figure 34.
New Output Name
figure 35.
Renamed Output
50
