MGP Pro Series • Operation
21
Input configuration submenu adjustments
The table below shows how to make the selections and adjustments that are accessed
through the Input Configuration submenus.
Input Configuration Submenu
Horizontal Knob Adjustment
Vertical Knob Adjustment
Video type
Accepted video signal types include:
RGB
S-video
RGBcvS
3G/HD-SDI
(MGP Pro
3G-SDI models only)
YUV-HD
Composite
video
YUVi
HDMI
Select input 1, 2, 3, or 4.
Select the desired video format for the
displayed input. Default is
RGB
Film mode
For low resolution inputs. The video
signal type for the input you are
configuring must be set to YUVi,
composite video, or S-video in order to
place the input in film mode.
Select input 1, 2, 3, or 4.
Shows the current film mode
status for the displayed input:
On
,
Off
, or
na
(not applicable).
Select
On
or
Off
to turn 3:2 or 2:2
pulldown (film mode) on and off for the
selected input.
Vertical start position
The distance in pixels from the top
edge of the total video input display
area to the top edge of its active area.
Select input 1, 2, 3, or 4.
Shows the current vertical start
point for the displayed input.
Increase or decrease the distance in pixels
from the top edge of the total video display
area to the top edge of its active area.
Default is
128
.
Horizontal start position
The distance in pixels from the left
edge of the total video input display
area to the left edge of its active area.
Select input 1, 2, 3, or 4.
Shows the current horizontal start
point for the displayed input.
Increase or decrease the distance in pixels
from the left edge of the total video display
area to the left edge of its active area.
Default is
128
.
Pixel phases 1 through 4
The point at which pixels are sampled
for the selected window. (These values
cannot be changed when the input is
HDMI, YUVi, S-video, or composite
video.)
Select input 1, 2, 3, or 4 for the
selected window.
Increase or decrease the displayed value
to move the pixel sampling point for the
selected window to an optimal sampling
point that ensures output clarity. The range
of settings is
0-31
. Default is
16
.
Total pixels
The width in pixels of the total video
display area. (The values cannot be
changed for HDMI, YUVi, S-video, or
composite video inputs.)
Select input 1, 2, 3, or 4.
Increase or decrease the width in pixels of
the total video display area of the selected
input. The default width is marked with an
asterisk (
*
) on the LCD screen.
Active pixels
The width in pixels of the active video
area.
Select input 1, 2, 3, or 4.
Increase or decrease the width in pixels
of the active video area of the selected
input. The default width is marked with an
asterisk (
*
) on the LCD screen.
Active lines
The height in lines of the active video
area.
Select input 1, 2, 3, or 4.
Increase or decrease the height in lines
of the active video area of the selected
input. The default width is marked with an
asterisk (
*
) on the LCD screen.
