Extron electronics mediaport 200, User Manual

Page: 72 / 164

Quick Setup Menu
Figure 66 below contains a selection of items that are also available on other menus. It
allows several basic configuration adjustments to be made to the MediaPort.
Auto-Image
<No>
HDMI Input EDID
720p@60Hz
Next
Menu
Activate Auto-Image
.
• No
•
Yes
Quick
Setup
Next
Rotate either
Adjust
knob to select a setting.
Test Pattern
Off
Select a video test pattern.
•
Off
(Default) •
Crosshatch
• Crop • Color Bars
•
Alt Pixels
•
Grayscale
Assign an EDID to the HDMI input.
•
See the Resolution and Refresh Rate
table on page 35 for a complete list
of available resolutions.
• Default: 720p @ 60 Hz
Default
Cycle
Next
Next
Next
Aspect Ratio
Fill
Select the amount of the display
the image will fill.
•
Fill
(Default)
• Follow
Next
Figure 66. Quick Setup Menu
From this menu, the following can be configured:
•
Auto-Image — Performs a one-time Auto-Image on the video input (see Performing
Auto-Image on the next page for more information about this function). Rotate either
Adjust
knob to select
Yes
or
No
.
• HDMI Input EDID — Select the Extended Display Identification Data (EDID) for the
input, or match it to the output rate (see Input EDID Table on page 72 for EDID
data). The default is
720P @ 60 Hz
.
• Aspect Ratio — Specify aspect ratio handling of the HDMI input. Rotate either encoder
to select
Fill
(fills the entire screen) or
Follow
(displays with the aspect ratio of the
input).
• Test Pattern — Choose a test pattern to aid in setting up the MediaPort. Rotate either
encoder to select one of the available patterns:
Off
(no test pattern),
Crop
,
Alt Pixels
,
Crosshatch
,
Color Bars
, and
Grayscale
.
NOTE: On the LCD screen, a default value is indicated by an asterisk (
*
) next to it.
figure 66.
Quick Setup Menu
MediaPort 200 • Front Panel Operation 65