MediaPort 200 • Remote Configuration and Control
134
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
Query firmware version
Q
n.nn
]
With tagged responses
(verbose modes 2 and 3):
Ver01*n.nn
]
View firmware version to
the second decimal place.
Query firmware build
version
*Q
n.nn.nnnn
]
With tagged responses
(verbose modes 2 and 3):
Bldn.nn.nnnn
]
View firmware version (to
the second decimal place)
and the build (to the fourth
decimal).
Query part number
N
60-1488-01
]
With tagged responses
(verbose modes 2 and 3):
Pno 60-1488-01
]
View the unit part number.
View internal
temperature
E
20STAT
}
X1@]
With tagged responses
(verbose modes 2 and 3):
20Stat
•X1@]
View unit internal
temperature
X1@
in
degrees Celsius.
IP Setup Commands
Set unit name (doubles
as TCP/IP hostname)
EX3@
CN
}
Ipn
•X3@]
Specify a name for the unit.
Set unit name to factory
default
E•
CN
}
Ipn
•X3#]
Reset the unit name to the
factory default name
X3#
.
View unit name
E
CN
}
X3@]
With tagged responses
(verbose modes 2 and 3):
Ipn
•X3@]
View the name of the unit.
Set verbose mode
EX3!
CV
}
Vrb
X3!]
Set the verbose mode and
tagged responses
X3!
.
View verbose mode
E
CV
}
X3!]
With tagged responses
(verbose modes 2 and 3):
Vrb
X3!]
View the current verbose
mode and tagged
responses status.
NOTES:
X1@
= Internal temperature (in degrees Celsius): Response is two digits, padded with a zero.
X3!
on page 118 for more information).
X3@
= Unit name: Text string of up to 63 characters (
A-Z
,
0-9
, and the hyphen (
-
) are permitted.
•
The first character must be a letter.
•
The last character cannot be a hyphen. No blank or space characters are permitted as
part of the name.
•
No distinction is made between uppercase and lowercase letters.
X3#
= Default name —
MediaPort‑200‑xx‑xx‑xx
.
The factory default name is a combination of the model name and the last three character
pairs of the MAC address.
