MediaPort 200 • Remote Configuration and Control
136
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
Set IP address
14, 24
EX7$
CI
}
Ipi
•X7$]
NOTES:
•
Attempting to set the IP address, subnet mask, or gateway address while DHCP is on results in an
E14
error message. After any IP setting adjustment is made,
•
The Restart Network command must be entered (see
View IP address
E
CI
}
X7$]
With tagged responses
(verbose modes 2 and 3):
Ipi
X7$]
View hardware (MAC)
address
E
CH
}
X8#]
With tagged responses
(verbose modes 2 and 3):
Iph
X8#]
Set subnet mask
EX7%
CS
}
Ips
•X7%]
View subnet mask
E
CS
}
X7%]
With tagged responses
(verbose modes 2 and 3):
Ips
X7%]
Set gateway IP address
EX7$
CG
}
Ipg
•X7$]
View gateway IP
address
E
CG
}
X7$]
With tagged responses
(verbose modes 2 and 3):
Ipg
•X7%]
View connections listing
E
CC
}
{number of
connections}
]
With tagged responses
(verbose modes 2 and 3):
Icc {number of
connections}
]
NOTES:
X7$
= IP address (
nnn.nnn.nnn.nnn
). Leading zeros in each of the four fields are optional in
setting values and are suppressed in returned values.
Factory default address (when DHCP is turned off) is
192.168.254.254
.
X7%
= Subnet mask (
nnn.nnn.nnn.nnn
). Leading zeros are optional in setting values in each
of the four fields, and are suppressed in returned values.
X8#
= Hardware (MAC) address (xx-xx-xx-xx-xx-xx)
