MediaPort 200 • Remote Configuration and Control
133
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
IP system reset
E
1ZQQQ
}
Zpq1
]
Reset only IP settings to
factory defaults.
NOTE:
This reset returns only IP settings such as IP address, subnet mask, gateway address, DHCP setting,
and port mapping (Telnet, Web, and direct access) to factory values.
Information Requests
General information
I
Typ
X#•
Blk
X4@•
Hrt
X1#•
Vrt
X1#]
With tagged responses (verbose modes 2 and 3):
Inf*Typ
X#•
Blk
X4@•
Hrt
X1#•
Vrt
X1#]
View video input
signal type (Typ),
video mute status
(Blk), and horizontal
(Hrt) and vertical
(Vrt) frequencies.
Query model name
1I
MediaPort 200
]
View the product name.
Query unit description
2I
HDMI and Audio to USB Scaling Bridge
]
With tagged responses (verbose modes 2 and 3):
Inf02*HDMI and Audio to USB Scaling
...
Bridge
]
Query system memory
usage
3I
{Bytes used out of total Kbytes}
]
Query user memory
usage
4I
{Bytes used out of total Kbytes}
]
USB information
35I
Host
X1)•
VSend
X1)•
CommOut
X5(•
CommIn
X5(•
pcPlaybackIn
X5(•
USBStd
X6)]
With tagged responses (verbose modes 2 and 3):
Inf35*Host
X1)•
VSend
X1)•
CommOut
X5(•
...
CommIn
X5(•
pcPlaybackIn
X5(•
USBStd
X6)]
NOTES:
X#
= Input video format:
0
= No input signal detected,
1
= DVI,
2
= HDMI
X1)
= On or off (enable or disable):
0
= Off or disable,
1
= On or enable
X1#
= Horizontal and vertical frequencies. Format is 4 digits with a single decimal place and
leading zeros. (Example:
0075.3
)
X4@
= Video mute:
0
= Off (unmute) (default),
1
= On (mute to black screen),
2
= On (mute output
sync and video)
X5(
= USB audio type:
0
= None,
1
= LPCM 2-Ch
X6)
= USB standard:
0
= None, no host,
1
= USB 1.1,
2
= USB 2.0,
3
= USB 3.0
