3.
Press the
Next
button on the front panel repeatedly to cycle through the submenus
within the selected menu.
4.
When the desired submenu is displayed,
rotate the horizontal (
[
) or vertical (
{
)
Adjust
knob clockwise or counterclockwise to cycle
through the submenu options. To return to a
menu from within one of its submenus, press
Menu
.
5.
When the
Adjust
knob has been rotated to
display the desired value, do one of the
following to confirm a selection:
•
Press
Next
to display another submenu.
•
Press the
Menu
button to exit the
submenu.
•
Wait until the LCD screen times out
to the default cycle (approximately
30 seconds).
NOTES:
•
The default items on the LCD
menus are usually followed by an
asterisk on the LCD screen.
•
The menus time out and the
default cycle is displayed after
30 seconds of inactivity. However,
any selections made with the
Adjust
knobs are saved and
remain in effect until they are
changed or the unit is reset to
factory defaults (see
Menu Flow Diagram
The flow diagram at right shows the menus that
are displayed on the front panel LCD screen and
the order in which they appear when the
Menu
button is pressed repeatedly.
Input
Presets
Menu
Menu
30 sec.
Default
Cycle
Menu
Next
Input
Configuration
Quick
Setup
30 sec.
30 sec.
Menu
Picture
Control
30 sec.
Menu
Output
Configuration
30 sec.
Menu
Menu
Audio
Configuration
30 sec.
Menu
Advanced
Configuration
30 sec.
Menu
View Comm
Settings
30 sec.
Menu
Exit Menu?
Press NEXT
30 sec.
Menu Flow Diagram
MediaPort 200 • Front Panel Operation
64
