MediaPort 200 with Exter
nal DSP with AEC
Setting Mix and Listening Levels Using the PCS Software
After setting up the MediaPort 200 inputs for optimal levels and the outputs according to
the signal level needed at the receiving devices (such as amplifiers, DSP, and video codecs),
MediaPort 200 mix and listening levels can be controlled from the
Mix
screen of the PCS
configuration software.
NOTE:
Audio should pass through the MediaPort 200 at unity gain (0 dB), but scenarios
may arise where the end user needs to adjust volume levels to account for new sources.
The following information explains how this can be done.
PCS Mix Screen
The
Mix
screen consists of four panels, each of which contains one or more faders. Below
each fader is a text field with up and down arrow buttons and a mute button that are
associated with it. Gain settings can be changed in each panel by either dragging the slider
button up and down, clicking and holding the incremental spin (arrow) buttons beside the
text field, or entering a value in the text field.
To display the
Mix
screen, click the
Audio
Config
button on the main window, then click
the
Mix
tab on the
Audio
Configuration
screen.
1
3
2
4
Figure 89.
Mix Screen
figure 89.
Mix Screen
Figure 76 Mix Screen
MediaPort 200 • with External DSP with AEC Application Setup
108
