Extron electronics mediaport 200, User Manual

Page: 125 / 164

MediaPort 200 • Remote Configuration and Control 118
X3!
= Verbose mode
0 = Clear or none (default for Telnet connections)
1 = Verbose mode is on (default)
2 = Verbose mode is off, tagged responses are sent for queries (tagged
responses are enabled).
3 = Verbose mode is on (enabled) and tagged responses are enabled and
sent for queries.
Verbose Responses Tagged Responses
X3!
Value
Receive unsolicited
responses for all actions
initiated via any source
(touch panel, port input,
internal Web page
changes, or commands)
instead of only for SIS
commands.
Receive tagged responses
to read or view commands.
Response to SIS
commands are always
tagged. Turning tagged
responses on adds tags to
the responses to SIS read
requests.
0
1

2 
3
 
X3@ = Unit name — A text string of up to 63 characters (
A-Z
,
0-9
, and the
hyphen (-) are permitted.
• The first character must be a letter.
• The last character cannot be a hyphen. No blank or space characters
are permitted as part of the name.
• No distinction is made between uppercase and lowercase letters.
X3# = Default name — MediaPort‑200‑xx‑xx‑xx .
The factory default name is a combination of the model name and the last
three character pairs of the MAC address.
X3$
= USB device name (doubles as the TCP/IP hostname), up to 32 upper and
lower case alphanumeric characters, including “_” “/” and spaces.
X3%
= String: filename.
X3^
= File size in kbytes.
X3*
= Overscan — MediaPort 200
(Only for SMPTE input rates (480i, 480p, 576i, 576p, 720p, 1080i, and
1080p @ 50 and 60 Hz)
0 = 0.0% — A true Auto-Image is executed on SMPTE inputs (default for
HDMI and DVI).
1 = 2.5% — Auto-Image commands snap to a 2.5% table. No true
Auto-Image is performed.
2 = 5.0% — Auto-Image commands snap to a 5.0% table. No true
Auto-Image is performed.
X3(
= Aspect ratio
1 = Fill — Each input rate automatically fills the entire output raster (default).
2 = Follow — Each input rate is displayed with its native aspect ratio.
X4)
= Screen saver mode
0 = Extron logo (default)
1 = Black screen or user-loaded logo
2 = Blue screen with text message