Extron electronics DTP CrossPoint 84, Setup Manual

Page: 28 / 34

DTP CrossPoint 84 • Remote Control 20
Command SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Lock (Executive) modes
NOTE:
See Setting the Front Panel Locks (Executive Modes) on page 17 for more information on the Lock modes.
Lock all front panel functions 1X Exe1
]
Enable Lock mode 1.
Lock advanced front panel
functions 2X Exe2
]
Enable Lock mode 2.
Unlock all front panel functions 0X Exe0
]
Enable Lock mode 0.
View lock status X
X1%]
Information requests
Information request I DTPCP84
]
Request part number N 60- nnnn - nn
]
See the Extron website for part number.
Query firmware version
Q X1^]
Example:
Q
1 . 23
]
The factory-installed controller firmware version is 1.23
(sample value only).
KEY:
X1#
= Preset
01 through 32
X1$
= Video and audio mute status 0 = no mutes 2 = audio mute
1 = video mute 3 = video and audio mute
X1%
= Lock mode 0 = lock mode 0 (unlocked) 1 = lock mode 1 2 = lock mode 2 (
default
)
X1^
= Firmware version number to second decimal place (
x . xx
)
Installing and Starting the Control Programs
Several useful Windows-based programs are available on the Extron website, including the Digital
Signal Processor (DSP) Configurator program, the Product Configuration Software (PCS), and the
Firmware Loader program.
The Product Configuration Software configures the video functions of the switcher.
The DSP Configurator program is required for full operation of the DSP functions of the switchers
and to save presets. It also provides some limited control of the non-DSP functions of the switcher.
See the
DTP Crosspoint 84 User Guide and the program Help file for more information.
Run either program from a PC connected to an ( item
Q
on page 7 or item
R
on page 8) or USB
port (item
A
on page 14) on the switcher.
NOTES:
• For details on operating the program, see the DTP CrossPoint 84 Switcher User Guide .
• The DSP Configurator program has a software switch that allows you to lock out audio
adjustments in the Product Configuration Software, making them unavailable for selection.
Installing the Programs
The DSP Configurator, version 2.6 or newer; PCS, version 2.0 or newer; and Firmware Loader are
available on the Extron website. Download and install all programs as follows:
NOTE: This procedure was written using Microsoft
®
Internet Explorer
®
. Depending on the
browser you use, some steps or indications may be different.
1. Go to www.extron.com and hover the cursor over the Download tab (see figure 11,
1
). The
Find Software & Downloads
link appears (
2
).