DTP CrossPoint 84 • Remote Control
23
The DSP Configurator program starts in Emulate mode (see figure 16).
NOTE:
In
Emulate
mode, changes and settings are stored in the PC and not sent to the
switcher until you select
Live
mode and "push' the settings to the switcher. See the
DTP CrossPoint 84 Switcher User Guide.
*
*
This output 1 amplifier block is not present on non-IPCP models.
Figure 16.
DSP Configurator
NOTE:
The DSP Configurator has a software lock that protects the complex DSP
audio adjustments, making them unavailable for selection in PCS. This protects
the DSP settings against inadvertent changes made by the more basic PCS
audio adjustment capabilities.
This software lock can be overridden, but Extron
STRONGLY
advises against
doing so.
16
