Extron electronics DTP CrossPoint 84, Setup Manual

Page: 21 / 34

DTP CrossPoint 84 • Front Panel Operations 13
Front Panel
Operations
This section describes simple DTP CrossPoint matrix switcher operation from the front
panel. Topics that are covered include:
•
Creating a Tie
• Recalling a Preset
• Viewing Ties (and Muting Outputs)
•
Viewing and Adjusting Volume and Mic Volume
• Setting the Front Panel Locks (Executive Modes)
Creating a Tie
NOTES:
• A "tie" is an input-to-output connection.
• A "set of ties" is an input tied to two or more outputs. (An output can never be
tied to more than one input.)
• A "configuration" is one or more ties, one or more sets of ties, or a combination.
1. Press and release the Esc button to clear any input button, output button, or control
button indicators that may be lit.
2. Press and release the Video and Audio I/O buttons to select or deselect video, audio,
or both as desired.
I / O
VIDEO AUDIO
Green
when selected
Off when deselected
Red
when selected
Off when deselected
NOTE:
Audio or video can be broken away (tied by itself) by selecting only the
Video button or only the Audio button.
3. Press and release the desired input button.
5
The button lights to indicate the selection.
4. Press and release the desired output buttons.
3 4
ENTER
8
Amber indicates video and audio tie.
Green
indicates
video
only tie.
Red indicates audio only tie.
Green
indicates the need
to confirm the change.
5. Press and release the Enter button. All button indicators turn off.