DTP CrossPoint 84 • Remote Control
22
Figure 14.
Product Configuration Software
Starting the DSP Configurator Program
The DSP Configurator can connect to the switcher via any rear panel LAN port or the front
panel Configuration port. The program can operate at 9600, 19200, 38400, or 115200
baud rates for the Remote port.
NOTE:
Extron recommends connection via an Ethernet LAN port for the DSP
Configurator program.
Start the DSP Configurator program, as follows:
1.
Click
Start
>
Programs
>
Extron
Electronics
>
DSP
Configurator
>
DSP
Configurator
. The DSP Configurator startup screen displays (see figure 14).
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Figure 15.
DSP Configurator Screen and Device Selection
TIP:
You can also launch the DSP Configurator program from within the Product
Configuration Software.
2.
If necessary, select the DTP CrossPoint switcher in the drop-down menu and click
OK
.
TIP:
If you have only DTP CrossPoint switchers of the same model, click
Always
perform
the
selected
operation
to eliminate step 2 in future startups.
14
15
