Removing Switches from Service
on page 375
on page 376
Removing a switch from service is a two-step process:
1. Disconnect the switch from its power source, following these steps as applicable:
•
Disconnect and remove the switch's removable AC power supply. See
•
Disconnect and remove the switch's removable DC power supply. See
•
Disconnect the switch from its redundant power supply.
2. Remove the switch from the rack, following the steps in
on page
376.
Note
Read the information in this chapter thoroughly before you attempt to remove a switch.
Removing an AC Power Supply
To remove an AC power supply unit (PSU) from a switch, follow these steps:
1. Disconnect the AC power cord from the wall outlet and from the power input connector on the
power supply.
374 ExtremeSwitching Hardware Installation Guide
