Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual Download Page 359

Page: 359 / 496

3. Carefully slide the power supply all the way into the power supply bay.

Figure 299: Installing an 750 W DC Power Supply

4. Push the power supply in until the latch snaps into place.

Caution
Do not slam the power supply into the switch.

5. Reconnect the ground wire as described in

Connect the Ground Wire to an 750 W DC Power Supply

on page 359.

Connect the Ground Wire to an 750 W DC Power Supply

To connect the ground wire to the 750 W DC power supply, follow these steps:

Warning
Be sure to connect the ground wire before you connect any power cables to the power
supply.

1. Verify that the DC circuit is de-energized.
2. Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an

appropriate ground point on the rack.

3. Identify the grounding post on the right side of the power supply, above the latching tab.

Replacing DC Power Supplies

Connect the Ground Wire to an 750 W DC Power

Supply

ExtremeSwitching Hardware Installation Guide 359

Summary of Contents for ExtremeSwitching X435 Series

















































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeSwitching X435 Series

Reviews:

Related manuals for ExtremeSwitching X435 Series

Brands by name

Popular brands

Extreme Networks ExtremeSwitching X435 Series, Hardware Installation Manual

Search results

Summary of Contents for ExtremeSwitching X435 Series

Reviews:

Related manuals for ExtremeSwitching X435 Series

Brands by name

Popular brands