Extreme Networks Alpine 3802, Hardware Manual

Page: 234 / 352

234 Extreme Networks Consolidated Hardware Guide
BlackDiamond 6800 Series Management Switch Module
You can install the MSM64i in one of the designated (lettered) slots in the BlackDiamond 6800 series
chassis:
• BlackDiamond 6816—Slots labeled A, B, C, or D
•
BlackDiamond 6808—Slots labeled A or B
• BlackDiamond 6804—Slots labeled A or B
Figure 115 shows the front view of the MSM64i.
Figure 115: Management Switch Fabric Module 64 (MSM64i)
The MSM64i module consists of a printed circuit board mounted on a metal panel that acts as the
insertion vehicle in a BlackDiamond 6800 series switch. The module carrier also includes
ejector/injector levers and captive retaining screws at each end of the module front panel.
The MSM64i has the following ports:
•
Console port—Used to connect a terminal and perform local management.
• Management port—Used to connect an Ethernet cable directly from your laptop into the
management port to view and locally manage the switch configurations.
• Modem port—Used to connect a modem for remote access to the CLI.
• PCMCIA slot—Reserved for future use.
See Chapter 1, “Summary of Common Switch Features” for more information about management ports,
and for more information about BlackDiamond MSM64i module specifications, see Appendix C,
“Module Technical Specifications.”
BlackDiamond 6804 1
2
32 Gbps
64 Gbps
Table 67: Packet throughput between I/O modules (continued)
Chassis # of MSM64i Modules Throughput
50015
EW_MSM64i
Module status LEDs
Module reset button
Console port
Modem port
Management port
PCMCIA slot
MGMT
PCMCIA
LINK /
ACTIVITY
MODEM
CONSOLE