Extreme Networks Alpine 3802, Hardware Manual

Page: 71 / 352

Summit5i Switch Rear View
Extreme Networks Consolidated Hardware Guide 71
*Extreme Networks proprietary. Connections between two Extreme Networks 1000BASE-LX interfaces can use a maximum distance of 10,000
meters.
NOTE
For more information about the supported GBIC types, see “GBIC Specifications” on page 25.
LEDs
All three Summit5i models have the following LEDs:
• Unit status
• Management
•
Port status
• Port speed
• Management port
For information about the LEDs and their activity on the Summit5i switch, see “Summit1i, Summit5i,
Summit7i, Summit48i, and Summit48si Switch LEDs” on page 84.
Summit5i Switch Rear View
Figure 21 shows the rear view for the Summit5i switch.
Figure 21: Rear view of the Summit5i switch
Power Sockets
The Summit5i switch supports up to two power supplies. Each power supply has its own power socket.
When a second power supply is installed and connected to a second independent power source, both
provide a redundant, load-shared power source to the Summit5i switch. If one of the power sources or
LX100
(1550 nm optical window) 10/125 µm single-mode fiber 100,000
UTP Category 5 UTP cable – 80
Table 22: GBIC types and maximum distances (continued)
Standard Media Type
Mhz•Km
Rating Maximum
Distance (Meters)
SHG_Rr5
AC Connectors Console port
Ethernet port
Reset button Label