Extreme Networks Alpine 3802, Hardware Manual

Page: 133 / 352

Installing the Chassis
Extreme Networks Consolidated Hardware Guide 133
Rack Installation
To mount the Alpine 3800 series chassis into a standard 19-inch (48.26 cm) rack, you need the following
tools, equipment, and resources:
• Helper bracket (provided)
• A minimum of four appropriate screws to secure the helper bracket (not provided)
• If you have an Alpine 3808 or 3804, a minimum of eight appropriate screws (not provided) to secure
the chassis into the rack
•
If you have an Alpine 3802, a minimum of four appropriate screws (not provided) to secure the
chassis into the rack
• # 1 Phillips screwdriver
• A minimum of two people to help install the chassis into the rack
To mount the chassis into a rack:
1
Mount the helper bracket in the lowest available position in the rack using four appropriate screws
(not provided), as shown in Figure 61.
Figure 61: Helper bracket for mounting the Alpine 3800 series chassis
2 Place the box that contains the chassis upright on a secure flat surface with the front of the box
facing you.
3 Remove the chassis from the box, and remove the packing material from the chassis.
4 Have a minimum of two people lift and place the empty chassis on the helper bracket and slowly
guide the chassis into the rack.
BDbrackt