Extraflame LUCREZIA IDRO LCD, Manual

Page: 27 / 48

27
REMOTE CONTROL
Chapter 6 Chapter 6
REMOTE CONTROL
The heat setting, the temperature, and automatic start/stop of the stove can be remote controlled.
To light the stove, press buttons 3 and 5 at the same time and hold for three seconds (Fig. 21); the stove
automatically enters the lighting stage. This is followed by the start-up phase, which allows the stove to
develop and settle the fl ame. When the lighting stage is complete, the stove goes into normal operation.
The heat setting can be adjusted using the buttons 5 and 4, and the room temperature setting can be
adjusted using buttons 2 and 3.
To switch off the stove, press buttons 3 and 5 at the same time and hold for three seconds. Display D1 will
show the message “
OFF ”.
The remote control operates with an MN21 12V battery (the kind used for gate openers).
To replace the batteries, open the cover in the rear part as illustrated below.
S = Luminous warning light that indicates which keys
have been pressed.
Correspondence of display keys with remote control
keys
1 = p3+p5
2 = p2
3 = p3
4 = p4
5 = p5
S
Open by pressing the part circled in the fi gure
P3
P2
P4
P5
fi gure 6.1
fi gure 6.2 fi gure 6.3