94
MB1 User Manual
© 2016 Expert Electronics
MAIN SCREEN DESCRIPTION
5.3.4.2
RX2 receiver
RX2 tab contains a САТ-system settings and control of the transceiver's PTT command via
COM-ports for the RX2 receiver.
·
Prot ocol - Exchange protocol menu with external devices.
Select the required exchange protocol with external devices or software from the list.
·
Enable CAT – Checkbox to enable control of the transceiver via the CAT-system.
·
Port name – COM-port number.
·
Parit y – Parity.
·
Dat a – Amount of data in bits.
·
St op bit – Amount of stop bits.
·
Baud rat e – Port speed.
·
PTT line – COM-port line to activate the TX mode.
·
Key line - COM-port line for the CW mode.
·
DTR/RTS – COM-port line for the PTT mode.