100
MB1 User Manual
© 2016 Expert Electronics
MAIN SCREEN DESCRIPTION
·
Encoder Led - enable backlit encoder.
·
RX1/RX2 menu - switching between RX1 and RX2 receivers, or assign exact E-Coder panel
to your receiver.
·
Volume - set the volume change step for one knob's clack.
·
Mic G ain - set the Mic gain change step for one knob's clack.
·
SQL - set the squelch threshold change step for one knob's clack.
·
Filt er High - set the filter's high limit change step for one knob's clack.
·
Filt er Low - set the filter's low limit change step for one knob's clack.
·
Filt er Widt h - set the filter's width change step for one knob's clack.
·
Filt er Shif t - set the filter's shift change step for one knob's clack.
·
Drive - set the output level power change step for one knob's clack.
·
RF G ain - set the RF gain change step for one knob's clack.
Addit ional f unct ions - Additional panel settings.
·
RX1/RX2 t ab - Com-port settings tab for rerouting the PTT signal from the panel to the
COM-port.
Enable PTT Transf er - Rerouting of the PTT signal from the panel to the COM-port.
Set the Enable PTT Transf er checkbox to enable rerouting the PTT signal.
·
Port name - COM-port number.
·
DTR/RTS - Select the COM-port line, which is used for transferring the PTT commands.
Set one of the DTR/RTS line checkbox to set it as the control line.
