62
MB1 User Manual
© 2016 Expert Electronics
MAIN SCREEN DESCRIPTION
5.2.7
MIC/CW SETTINGS
Press and hold the MI C button on the front panel of the transceiver to open/close the local
panel.
MI C1 - MIC 1 button.
Press the MI C1 button to choose corresponding microphone.
MI C1 G AI N - Microphone input gain control.
Set the required gain level of the microphone input. Control sets the max microphone's AGC
gain, while the microphone AGC is active.
MI C2 - MIC 2 button.
Press the MI C2 button to choose corresponding microphone.
MI C2 G AI N - Microphone input gain control.
Set the required gain level of the microphone input. Control sets the max microphone's AGC
gain, while the microphone AGC is active.
MI C PC - PC's sound card MIC.
Press the MI C PC button to choose PC's microphone.
MI C PC G AI N - Microphone input gain control.
Set the required gain level of the microphone input. Control sets the max microphone's AGC
gain, while the microphone AGC is active.
BREAK I N - CW VOX mode.
Press the BREAK I N button to enable this mode - transceiver will automatically turn to the TX
mode by the press on the CW keyer.
I AMBI C - Automatic dots and dashes generation.
Press the I AMBI C button to enable auto generation of the CW signal.
If the I AMBI C mode is off, while you press the CW keyer it will generate tone signal with PITCH
frequency.
REV PADDLE - Dots and dashes reverse switch.
Press the REV PADDLE button to switch dots and dashes in reverse order on your CW keyer.
BREAK I N DELAY(ms) - Timing control, to keep the transceiver in the TX mode.
Set the required time for the transceiver to hold in the TX mode, after you let go of the CW
keyer.
