87
MB1 User Manual
© 2016 Expert Electronics
MAIN SCREEN DESCRIPTION
·
Show t he dif f erence bet ween VFOA and VFOB - Show the difference between VFOA
and VFOB.
Set the Show t he dif f erence bet ween VFOA and VFOB checkbox to display the
difference between VFOA and VFOB near the cursor.
·
Aut o hide cursor - Automatically hide the cursor from the spectrum scope.
Set the Aut o hide cursor checkbox to let the cursor disappear after idle 2 seconds.
·
Show st at ions f rom Memory panel - Show the stations previously stored in the frequency
memory.
Set the Show st at ions f rom Memory panel checkbox to show on the spectrum scope
previously stored stations as a markers (blue dots in the top area of the spectrum scope).
When rollover the station's marker you'll see the commentary.
·
Show spot s - Show spots from the CW Skimmer on the spectrum scope.
Set the Show spot s checkbox to show spots from the CW Skimmer on the spectrum scope
as a markers with call-signs.
·
Show S-Met er on Band Scope - Show the S-Meter on the Band Scope.
Set the Show S-Met er on Band Scope checkbox to show the S-Meter on the Band Scope
for each VFO.
5.3.3.3
Waterfall
On the Wat erf all tab you can see the transceiver's waterfall settings.
·
St op in TX mode - Stop the waterfall in TX mode.
Set the St op in TX mode checkbox to disable the waterfall while transmitting.
·
Level mode - Waterfall bright menu.
Choose the bright mode from the list: Automatic, Synchronous.
Synchronous mode depends on the set limits of the spectrum amplitude.
Automatic mode depends on air signals and set offset in the settings below.