187
MB1 User Manual
© 2016 Expert Electronics
SPLIT OPERATION
2. Act ivat e Sub-receiver by pressing the SUB button, on the front panel of the transceiver.
Flashing blue
indicator in the main software window means the Sub-receiver is
enabled.
3. Set the required transmit frequency (VFO B) (more details in
).
4. Listen to the VFO A and VFO B frequencies simultaneously. If you need to adjust the Volume
and Balance of each VFO A and VFO B (more details in
).
5. Press the microphone РТТ button or the ТХ button on the the front panel of the transceiver to
transmit the message.
6. Release the microphone РТТ button or press again the ТХ button on the the front panel of
the transceiver to turn to RX mode.
Note:
(
Sub-receiver's red tuning line means that you'll transmit on the VFO B frequency.
(
While in you are in CW mode with BREAK IN function enabled, the transceiver will turn to TX
on VFO B frequency automatically when pressing the CW key.
(
While in digital modes the transceiver will turn to TX on VFO B frequency automatically if
received the PTT signal via the CAT-system or a certain COM-port.
159
151
