180
MB1 User Manual
© 2016 Expert Electronics
TRANSCEIVER OPERATIONS
7.40 Transmitting in Voice mode
1. Press the РТТ button on the microphone or the ТХ button on the front panel of the
transceiver.
2. Speak in the microphone in a calm tone.
3. Release the РТТ button on the microphone or press again the ТХ button on the front panel
of the transceiver.
Note:
(
After connecting the PTT footswitch to the PTT connector on the rear panel of the transceiver
) you may push the footswitch to turn to transmission. Release
the footswitch to stop transmission and return to RX mode.
7.41 Transmitting in CW mode
1. Connect the CW key to the transceiver.
2. Set the CW mode type.
3. Enable the BREAK-I N mode on the local panel
.
4. Use the CW key.
Note:
(
When you transmit in the CW mode - red TX indicator is flashing.
7.42 DAC OUT operation
DAC OUT is the transceiver's low-power output, works in the wide frequency band.
1. To work with the DAC OUT press the DAC OUT button in the local panel of the HF path.
2. Tune on the required frequency.
3. Enable the TX mode by pressing the РТТ button on the Mic or the ТХ button.
19
62
