![background image](http://html1.mh-extra.com/html/expain/change-x/change-x_user-manual_2451562015.webp)
English
15
state. This is done as follows: Turn
the device on and set it to charge.
Press the button until the device
starts flashing red. When the device
lights red and vibrates, the factory
settings are restored.
Maintenance and Storage
Clean the device with a dry or
slightly damp cloth.
Make sure the device does not get
wet. It is not recommended to use
the device in humid environments
or if you plan to do activities that will
cause sweating.
The Arm-strap can be washed
in water, but only after that the
electronic unit has been removed.
The unit should be transported,
stored and operated in
temperatures between 10°C
and 40°C, at a relative humidity
Summary of Contents for CHANGE X
