EXFO T100S-HP Essential, User Manual, Page: 9 / 70

Important Safety Information for Your Product
T100S-HP User Guide 9
Optical Safety Safety Symbols on Your Product
Optical Safety Instructions
Your instrument is in compliance with standards IEC 60825-1: 2007 and 2014.
Laser radiation may be encountered at the optical output port.
The following labels indicate that the product contains a Class 1M source:
Pout max: / Psortie max. : ≤ 42 mW (on 1240-1400 nm); 100 mW (on 1400-1680 nm)
Complies with standards 21 CFR 1040.10, except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007.
Symbol Meaning
This symbol on your product indicates that the unit is equipped with a
laser source, or that it can be used with instrument equipped with a
laser source. These instruments include but are not limited to,
modules and external optical units.
Warning
• (IEC 60825-1: 2007) Viewing the laser output with certain optical
instruments designed for use at a distance (for example, telescopes
and binoculars) may pose an eye hazard.
• (IEC 60825-1: 2014) Viewing the laser output with telescopic optical
instruments (for example, telescopes and binoculars) may pose an eye
hazard and thus the user should not direct the beam into an area where
such instruments are likely to be used.
• Do not install or terminate fibers while a light source is active.
• Never look directly into a live fiber and ensure that your eyes are
protected at all times.
RAYONNEMENT LASER INVISIBLE
NE PAS OBSERVER DIRECTEMENT
À L'AIDE D'INSTRUMENTS
D'OPTIQUE
NE PAS EXPOSER LES
UTILIISATEURS DE DISPOSITIF
OPTIQUE TÉLESCOPIQUE
APPAREIL À LASER DE CLASSE 1M
INVISIBLE LASER RADIATION
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
DO NOT EXPOSE USERS OF
TELESCOPIC OPTICS
CLASS 1M LASER PRODUCT