EXFO T100S-HP Essential, User Manual, Page: 13 / 70

Product Presentation
T100S-HP User Guide 13
Table 2: Technical Specifications
Environmental Specifications
Table 3: Environmental Specifications
Communication interfaces
*8
RS-232C and GPIB (IEEE-488.1)
Temperature / Humidity range +15 °C to +30 °C (+60 °F to +85 °F) / <80% (non-condensing)
Electrical
Specifications Power supply
100-240 V ; 50/60 Hz
Maximum input
current
5 A rms
Maximum power
consumption
300 W
Fuse type 2x T4AL250V, 5 x 20 mm (0.2 x 0.79 in)
Equipment has double fuse in both Line and Neutral conductors.
Laser safety classification Class 1M
Laser type External cavity laser diode
Laser output Single mode optical fiber
Laser Output divergence
(full angle at 1/e2)
0.18 rad
Dimensions (W x H x D) 448 x 370 x 133 mm (17.64 x 14.6 x 5.2 in)
Weight 12.5 kg (27.5 lb)
All specifications are given after 60 minutes warm-up and apply for wavelengths not equal to any absorption line.
*1: Measured over a 0.1 nm bandwidth ±1 nm from the signal.
*2: For output power ≥ 0 dBm.
*3: Over one hour at constant temperature.
*4: RIN within the range 100 MHz–3 GHz measured at +8 dBm output power with RBW = 30 kHz.
*5: O and CL at 10 dBm / Others at 8 dBm, ±40 pm all at 0 dBm.
*6: Validated at 0 and +10 dBm for essential and 0 and +8 dBm for extended range models.
*7: Over 100 wavelength scans at constant temperature.
*8: GPIB tested & validated with National Instruments GPIB Board.
Essential Models Extended Range Models
O CL O+ ES SCL CLU
Equipment Type Test and measurement
Overvoltage category II
Pollution degree 2
Temperature Operation: +10 ˚ C to +35 °C (+50 ˚ F to +95 °F)
Storage: -10 °C to +50 °C (+14 °F to +122 °F)
Maximum relative humidity < 80 % (non-condensing)
Altitude (maximum operating) 2000 m (6562 ft)