EXFO T100S-HP Essential, User Manual, Page: 12 / 70

Product Presentation
12 T100S-HP User Guide
Table 1: T100S-HP – Main Features
1.2 Technical Specifications
The following table lists the technical specifications of all T100S-HP models.
Multiple modulation
capability Easy direct analog and digital modulation of the laser:
• Low frequency modulation
• High frequency modulation.
• Coherence control.
Easy system integration A fully integrated system featuring computer interfaces, on-
board software, and analog inputs/outputs to allow all
operations to be performed in remote mode and to make
integration into a test set-up easy.
Feature Description
Essential Models Extended Range Models
O CL O+ ES SCL CLU
Wavelength range (nm)
1260–1360 1500–1630 1240–1380 1350–1510 1440–1640 1500–1680
Output power Over full
wavelength range
≥ +10 dBm ≥ +8 dBm
Peak ≥ +13 dBm
Signal to source spontaneous
emission ratio
*1
≥ 90 dB (100 dB typical)
Side mode suppression ratio
*2
≥ 45 dB
Stability
*3
Wavelength ±5 pm/h (±3 pm/h ; ±5 pm/24h typical)
Output Power ±0.01 dB/h (±0.025 dB/24h typical)
Relative intensity noise
*4
< -140 dB/Hz
Spectral width (FWHM) > 100 MHz (coherence control on)
400 kHz typical (coherence control off)
Absolute wavelength accuracy
*5
±20 pm
Wavelength setting repeatability 5 pm typical
Wavelength setting resolution 1 pm (0.1 pm in fine tuning mode)
Fine tuning mode range ±25 pm (±2 GHz)
Tuning speed in step mode Approximately 1 s for 100 nm step
Mode hop free range
*6
Full wavelength range
Continuous sweep speed Adjustable from 1 to 100 nm/s
Power flatness during sweep ±0.25 dB typical
Power repeatability sweep to
sweep
*7
±0.05 dB typical
Low frequency modulation DC to 8 MHz (sinusoidal), DC to 1 MHz (TTL)
High frequency modulation 30 kHz to 200 MHz
Output fiber type SMF or PMF (option)
Output connector FC / APC