83
HPS-III-Nadelverschluss-Heißkanalsystem_Montage_BA_V-2-0_EN
Installation of HPS III valve gate hot runner systems
1. Lift the hot half carefully out of the transport crate.
Due to the better force application point EWIKON re-
commends to use attachment swivels only (pos. a, see
chapter „5.1 Transport“ and chapter „5.3.1 Tools and
operating materials“).
2. Check the hot half for possible transport damage (visual
check).
Introduction and preliminary measures
Picture 56: Preliminary measures
z351-03
Suspended load
Death and severe crushing of body or extremities.
•
Keep clear of and do not pass under suspended loads.
•
Keep clear of suspended loads while they are being transported.
•
Do not touch lifting devices and lifting accessories while lifting the
load.
•
Only lift, transport and set down loads, if you have received ap-
propriate training.
•
Only use suitable and undamaged lifting devices and lifting
accessories which are checked regularly.
•
Do not exceed the maximum load limit of lifting accessories.
Sharp edges and heavy components
•
Cut injuries to body and extremities, mainly to the hands.
•
Crushing of fingers or hand.
WARNING!
Summary of Contents for HPS III
Page 2: ......
Page 116: ...116 HPS III Hei kanalsystem_Instandhaltung F hlerwechsel S SXE_BA_V 2 0_EN...
Page 122: ...122 HPS III Hei kanalsystem_Instandhaltung F hlerwechsel S SXE_BA_V 2 0_EN Maintenance...
Page 126: ...126 HPS III Hei kanalsystem_Instandhaltung F hlerwechsel S SXE_BA_V 2 0_EN Maintenance...
