EWIKON HPS III, Operating Manual

Page: 16 / 144

16 HPS-III-Heißkanalsystem_Vorspann_BA_V-2-0_EN
Technical data
3. Technical data
3.1
Mechanical specifications
3.1.1 Main dimensions of the HPS III hot runner system
Description Quantity/size (approx.) Unit
Dimensions See catalogue / PO-related documents mm
Weight See catalogue / PO-related documents kg
Chart 2: Main dimensions of the HPS III hot runner system
3.1.2 Operating parameters of the HPS III hot runner system
Description Quantity/size (approx.) Unit
Maximum injection pressure 2000 bar
Maximum operating temperature Depending on order °C
Chart 3: Operating parameters of the HPS III hot runner system
3.2
Electrical specifications
3.2.1 Connections/connector pin assignment
Description Quantity/size (approx.) Unit
Voltage 230 V
Frequency 50 Hz
Chart 4: Electrical data (only valid within the EU)
3.3
Hydraulic / pneumatic specifications (drive units)
Description Quantity/size (approx.) Unit
Maximum hydraulic pressure (normal operation: 30 bar) 50 bar
Maximum pneumatic pressure (normal operation: 8 bar) 10 bar
Chart 5: Hydraulic / pneumatic data
3.4 Operating conditions
Operating conditions Size (approx.) Unit
Ambient temperature (maximum value) 40 °C
Ambient temperature (minimum value) 10 °C
Relative humidity during operation (no condensation!) 20 to 80 %
Chart 6: Operating conditions
3.4.1 Noise emission
Determining the sound power level of noise sources based on noise pressure measurements acc. to DIN EN ISO 3741
Operating conditions Size (approx.) Unit
Distance to device * mm
Noise pressure level (operation) * dB (A)
Chart 7: Noise emission
* Values can be determined only after the entire system has been started up.