Evoqua WALLACE & TIERNAN Barrier M 1200, Operating Manual

Page: 53 / 110

Barrier M
Operation
5.
53
The cleaning intervals for an automatic cleaning cycle in operation
and standby mode are set and/or adjusted in this menu. There are
two submenus, operation and standby.
Press the acknowledge key to access the submenus:
Cleaning interval during operation. If you only want the automatic
cleaning mechanism to be activated depending on the minimum
UV intensity, set the interval time to "0". Change the interval by
pressing first the acknowledge key and then the UP key.
Cleaning interval during standby. If you want no cleaning at all du-
ring standby, set the interval time to "0". Change the interval by
pressing first the acknowledge key and then the UP key.
Press the UP key to access the next menu.
From this menu, the acknowledgement key can be used to trigger
an immediate cleaning operation.
Please note
To operate the cleaning mechanism make sure that the chamber
is completely filled with water all the time. Operating the cleaning
mechanism in a not (completely) filled chamber will damage the
system.
From this menu, the acknowledge key can be used to run an LED
test.
LED test on
LED test off
Display Range / unit Factory setting
Cleaning interval
during operation 0 - 999 minutes 720 min
Cleaning interval
during standby 0 - 48 h 0 h
Cleaning
Operation: 720min
Standby: 24h
Cleaning action
LED Test