Evo ARP100, Instruction Manual, Page: 11 / 36

11
6. Attach the Rower Seat
Remove the
•
four M8 x 16mm Hex Socket Head Bolt (J6)
from the bottom of Rower Seat with the 6mm Allen Key
provided as shown.
Attach the
•
Rower Seat to the Seat Carriage Assembly with
four M8 x 16mm Hex Socket Head Bolt (B5) as shown.
Tighten these bolts with the 6mm Allen Key provided
•
securely.
NOTE : The front ( shorter edge ) of the seat should face to the
ground.
Final Checks
Your Rower is now assembled. Please make the following checks before you use it for the first time.
•
Make sure all screws, bolts and nuts are tighten securely.
•
Make sure you have positioned it on a flat , level surface.
FIXINGS: FIXINGS:
x
4
FIXINGS: TOOLS:
Part
No.
B5
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Rower Seat
Adapter
Seat Carriage
Assembly
7. Power Up
Plug one end of the adaptor into your rower as shown.
•
Plug the other end into a suitable AC outlet ( 110 or 220~240V / 50Hz)
•