Evil Mad Scientist AxiDraw MiniKit 2, Assembly Manual

Page: 59 / 75

5.4 Cable guide wrapping
1. Get out the Micro Servo Motor #54 . Set aside and keep the
accessories that are packaged with it.
2. Carefully uncoil the Support Wire #57 , and position one
looped end of it next to the body of the servo motor (
A
).
3. Starting from the body of the Servo Motor, wrap the Spiral
Wrap Tubing
#56
around the servo cable and support wire.
As you do so, keep the cable and wire together, and keep the
loop end next to the servo body ( B , C , D ).
(Continues on next page)
!
The Support Wire is made from spring-temper stainless
steel. It is very springy and may have sharp ends that can
spring at you. Handle with appropriate care.
A
B
C
D
59