PC-over-IP Administrative
Interface User Manual
94
Note: For this example, it is assumed that very little data is required from the Portal back
to the Host (i.e. USB keyboard and mouse data), and therefore the only the Host
bandwidth is limited. To be complete, the Portal bandwidth limit could also be configured.
1. Open the Host Administration Web Interface for the first user’s Host by using an
internet browser to open the Host IP address
2. Log in to the Host Administration Web Interface
3. Select the
Bandwidth
webpage from the
Configuration
menu
Figure 4-18: Host Bandwidth Limit Configuration (25 Mbps)
4. Enter 25 in the Device Bandwidth Limited field
5. Enter 20 in the Device Bandwidth Target field
6. Select the
Apply
button to accept the changes
7. Repeat for the other three users’ Hosts
The bandwidth is now limited to 25 Mbps and targeted to 20 Mbps for each user.
Figure 4-19 shows simplified bandwidth usage with the limit for each user now configured
for 25 Mbps. This figure shows that all users are limited to 25 Mbps and do not have
access to more bandwidth when required. It also shows that even when the usage is
totaled, the total switch bandwidth (100 Mbps) is never fully used.
Also note that since there is no congestion, there is no requirement to reduce the
bandwidth to the targeted 20 Mbps or lower.
