PC-over-IP Administrative
Interface User Manual
35
1.6.12.2 Enable
NTP
The
Enable NTP
field allows the administrator to enable and disable the NTP feature.
1.6.12.3
Identify NTP Host By
The
Identify NTP Host by
selector allows the administrator to choose whether the NTP
Host is identified by IP address or by Fully Qualified Domain Name (FQDN). If NTP is
disabled, this field is not required and is not editable.
Table 1-8 shows the configuration parameters available when either method is chosen. If
an invalid IP address or DNS name is entered, the web interface will prompt the
administrator to correct it.
Table 1-8: NTP Host Method
Method Data
Fields
IP address
NTP Host IP Address
FQDN
NTP Host DNS name
1.6.12.4 NTP
Host
Port
The
NTP Host Port
field configures the NTP port number.
1.6.12.5 NTP
Query
Interval
The
NTP Query Interval
fields allow the administrator to configure the query interval. The
first field denotes the interval period and the second field denotes the time unit in
Minute(s)
,
Hour(s)
,
Day(s)
and
Week(s)
.
1.6.12.6 Time
Zone
The
Time Zone
field allows configuration for the local time zone.
1.6.12.7
Enable Daylight Savings Time
The
Enable Daylight Savings Time
field allows the administrator to enable and disable
automatic adjustment for daylight savings time.
1.6.13
Password
The
Password
webpage allows the administrator to update the local administrative
password for the device. Note that this will affect the web interface and the local GUI.
The password can be a maximum of 20 characters.
Note: Care must be taken when updating the Portal Password as the Portal may become
unusable if the password is lost.
Note: The Portal Password can also be updated using the Portal OSD. See Section
2.7
Password
.
