PC-over-IP Administrative
Interface User Manual
92
12. Select the
Reset
button to reset the PCoIP processor
Note: The Host will not reset immediately. The reset will be deferred until the Host PC
restarts, enters standby, hibernates or powers off.
4.2.3
Initiating DHCP Discovery Session
Start the DHCP discovery session:
1. From the Portal OSD, select the
Connect
button to start discovering available hosts
Figure 4-15: DHCP Discovery Connect Screen
2. Select the desired host from the
Discovered Hosts
screen and select
OK
Figure 4-16: Discovered Hosts Screen
3. When connected, the Host computer is ready to use over PCoIP
4.3
Bandwidth and Image Configuration Example
This example outlines the steps for optimizing user experiences in an environment where
bandwidth is constrained. Here it is assumed that there are four task-based workers (web
browsing, simple word processing, simple spreadsheet manipulation, and small video
windows) that are to share one 100-Mbps switch.
Due to the nature of these tasks, the users do not require heavy graphics changes and
each user would likely require peak network bandwidth at different times.
