manualshive.com logo in svg

EVGA PC-over-IP Administrative Interface, User Manual

The EVGA PC-over-IP Administrative Interface is a powerful software tool that allows users to seamlessly manage their PC-over-IP connections. Enhance your administrative capabilities with this intuitive interface by downloading the comprehensive user manual for free from our website. Obtain in-depth guidance on setting up, optimizing, and troubleshooting your PC-over-IP system effortlessly.

Share
Download
background image

 

PC-over-IP Administrative

 

Interface User Manual

 

 

 

 

26

 

Enable Host Discovery 

The 

Enable Host Discovery

 feature allows the Portal to discover Hosts that are not in a 

PCoIP session.  

When enabled, the Portal is able to display up to 10 available hosts in the order that they 
were discovered. It is expected that the Enable Host Discovery feature will be used with 
small numbers of Hosts. 

This option is only available on a Portal; on the Host it is disabled and non-editable.  

1.6.4.2  DNS SRV Discovery 

Enable DNS SRV 

When the 

Enable DNS SRV

 option is enabled, the Host and Portals can be dynamically 

discovered by a discovery method that uses DNS SRV Resource Records, without 
requiring prior knowledge of their locations in the network.  

Using a discovery mechanism can dramatically reduce configuration and maintenance 
effort for complex systems. This discovery mechanism is independent of SLP Discovery. 

DNS SRV Discovery Delay 

The 

DNS SRV Discovery Delay

 configures amount of delay time in seconds between 

DNS SRV Discovery attempts. DNS SRV Discovery continues periodically until the 
device is successful in contacting a Connection Management Server. 

1.6.5

 

Session 

The 

Session

 webpage allows an administrator to configure how the device connects to or 

accepts connections from peer devices. 

Note: The Portal Session parameters can also be configured using the Portal OSD. See 
Section 2.3.5 Session. 

Summary of Contents for PC-over-IP Administrative Interface













































































































Reviews:

No comments

Related manuals for PC-over-IP Administrative Interface

Arturia JUPITER-8V 2 User Manual preview
JUPITER-8V 2
Brand: Arturia Pages: 125
F-SECURE MOBILE SECURITY 2010 FOR ANDROID Manual preview
MOBILE SECURITY 2010 FOR ANDROID
Brand: F-SECURE Pages: 20
Ricoh Caplio Utility for Macintosh Operation Manual preview
Caplio Utility for Macintosh
Brand: Ricoh Pages: 19
Qlogic SANbox-8 User Manual preview
SANbox-8
Brand: Qlogic Pages: 180
Paradyne 8922 Installation And User Manual preview
8922
Brand: Paradyne Pages: 24
ACTi Network Video Recorder User Manual preview
Network Video Recorder
Brand: ACTi Pages: 132
GRASS VALLEY Aurora Edit Security Application Note preview
Aurora Edit Security
Brand: GRASS VALLEY Pages: 5
Qlogic SANsurfer FC HBA Manager Application User Manual preview
SANsurfer FC HBA Manager Application
Brand: Qlogic Pages: 218
Quantum PX500 Series Quick Start Manual preview
PX500 Series
Brand: Quantum Pages: 6
LinPlug SaxLab User Manual preview
SaxLab
Brand: LinPlug Pages: 40
LinPlug RMV Reference Manual preview
RMV
Brand: LinPlug Pages: 154
Oki LP441s Manual preview
LP441s
Brand: Oki Pages: 34
Lucent Technologies INTUITY Messaging Solutions Manual preview
INTUITY Messaging Solutions
Brand: Lucent Technologies Pages: 80
Patton electronics ForeSight 6300 NMS Administrator'S Reference Manual preview
ForeSight 6300 NMS
Brand: Patton electronics Pages: 156
Garmin nRoute Help Manual preview
nRoute
Brand: Garmin Pages: 130
AudioRealism Bass Line User Manual preview
Bass Line
Brand: AudioRealism Pages: 18
Cabletron Systems CoreWatch User Manual preview
CoreWatch
Brand: Cabletron Systems Pages: 495
M-Audio ProjectMix Control Manual preview
ProjectMix
Brand: M-Audio Pages: 7

Brands by name

Popular brands

Load more brands