PC-over-IP Administrative
Interface User Manual
21
Table 1-4: Step 3: Host Session Parameters
Parameter Comments
Accept Any Portal
Allows the Host to accept any Portal for a PCoIP Session
(refer to Section 1.6.5).
Portal MAC Address
Allows the administrator to specify the Portal MAC address
for a PCoIP Session (refer to Section 1.6.5).
Table 1-5: Step 3: Portal Session Parameters
Parameter Comments
Session Type
Specifies the PCoIP or RDP session (refer to Section 1.6.5).
Identify Host by
Specifies the Host identity method (refer to Section 1.6.5).
Host IP Address
Specifies the Host IP address (refer to Section 1.6.5).
Host MAC Address
Specifies the Host MAC address (refer to Section 1.6.5).
Note: When Host Discovery or connection management is configured by default on the
Portal, it is not possible to modify the Portal session parameters. A message will be
displayed on the Initial Setup Portal webpage instead of the
Step 3: Session
parameters.
1.6.1.4 Step 4: Apply Changes
Step 4: Apply Changes
allows the administrator to apply the parameter updates made in
the steps above. Parameters will not be updated until
Apply
is selected.
1.6.2
Network
The
Network
webpage allows an administrator to set the Portal and Host network
parameters.
Note: The Portal Network parameters can also be configured using the Portal OSD. See
Section
2.3.2
Network
.
