![background image](http://html.mh-extra.com/html/evertz/mvip-ii/mvip-ii_user-manual_2445225062.webp)
MViP-II
IP Based Multi-Image Display & Monitoring Solution
Page - 52
Revision 1.2
Record Settings
Enabled:
This control allows the user to enable or disable record settings.
Number of Records:
This field allows the user to set number of records.
Clip Settings
Pre Record Time:
This field refers to TS clip recording time before the fault occurs.
Post Record Time:
This field refers to TS clip recording time after the fault occurs.
Storage Settings
Local Storage:
This control enables the recording to be saved on the MViP-II server and used for
exporting.
Upload to FTP Server:
This control enables the recording to be uploaded automatically to a remote
FTP server. When enabled, an FTP Server URL window will appear to set the address.
6.4.2. Display Encoder (+ENC)
The MViP-II, when enabled with +ENC, provides the user with the ability to send out the mosaic views
over IP in any of the four Data Ethernet ports.
In the
Edit Mode
, click on the
System
tab. Select the
Display Encoder
for configuring the output.
Figure
6-36 : Encoder Output Configuration Tab
Once selected, the
Display Encoder
menu will appear as seen in Figure
6-37. Each display monitor can
be configured according to the user needs.