![background image](http://html.mh-extra.com/html/evertz/mvip-ii/mvip-ii_user-manual_2445225097.webp)
MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 87
10. CONFIGURING SETTINGS WITH LEGACY FIRMWARE
10.1. LEGACY NETWORK SETTINGS METHOD
To set IP Address settings on MVIP-II
:
7. Press CTRL+ALT+F2 to access local terminal command line
8. Login to Configshell (username: admin / password: admin)
Figure
10-1 : Server Configuration Login
9. Navigate to
Network
Configuration
> eth0, eth1, eth2, eth3 (control port, data ports 1 to 3)
Figure
10-2 : Configuration Menu
10. Enter in the IP Address settings for all ports used, navigate to bottom and select "Save and Apply".
11. User will be prompted to enter a password to confirm these settings. Type “admin”. The interfaces
will configure automatically