MViP-II
IP Based Multi-Image Display & Monitoring Solution
Page - 84
Revision 1.2
•
Error Duration (Seconds):
The error duration controls how many seconds of SCTE 27 subtitle
loss state must pass before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of valid SCTE 27
subtitle decodes must pass before the fault is cleared.
Teletext Bitrate loss:
Teletext Bitrate Loss is triggered when the bitrate of the teletext data stream is not
detected.
•
Error Duration (Seconds):
The error duration controls how many seconds of teletext bitrate loss
must elapse before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of valid teletext bitrate
must elapse before the fault is cleared.
Teletext Data Loss:
This Fault is triggered when no valid Teletext subtitle data is decoded. Independent
faults are triggered for each Teletext service monitored.
•
Error Duration (Seconds):
The error duration controls how many seconds of Teletext subtitle loss
state must pass before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of valid Teletext
subtitle decodes must pass before the fault is cleared.
Loss of Closed captioning CC1-Cc4:
This Fault is triggered when no valid Closed Captioning CC1-CC4
services are decoded.
•
Error Duration (Seconds):
The error duration controls how many seconds of CC1-CC4 loss state
must pass before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of valid CC1-CC4
decodes must pass before the fault is cleared.
Loss Of 708 Service 1-16
:
This Fault is triggered when no valid Closed Captioning 708 services 1-16 are
decoded.
•
Error Duration (Seconds):
The error duration controls how many seconds of 708 services 1-16
loss state must pass before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of valid 708 Service 1-
16 decodes must pass before the fault is cleared.
Video Scrambled:
This fault will trigger if video is detected scrambled or encrypted.
•
Error Duration (Seconds):
The error duration controls how many seconds of video that is
detected scrambled must pass before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of valid unscrambled
video must pass before the fault is cleared
Bitrate Low:
This Fault is triggered when the bit rate of the stream falls below a set threshold in mbps.
•
Error Duration (Seconds):
The error duration controls how many seconds of bitrate below
specified threshold that must pass before the fault is triggered.
•
Reset Duration (Seconds):
The error duration controls how many seconds of bitrate above
specified threshold that must pass before the fault is cleared
Threshold (Mbps):
The threshold is the target bit rate value. This applies to all decoded streams from the
source.
