MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 81
Output Tabs:
This section allows the user to select controls for output 1 or 2.
Layout Name:
This field allows the user to select a current layout to load on each input. A list will be
provided with currently saved layouts.
Audio input:
This dropdown allows the user to select the source input of the audio channel to be
monitored externally.
Audio Steam:
This dropdown allows the user to select an available audio service of the selected source
to be monitored.
8.2.10. Display Encoder (+ENC)
When +ENC option is licensed, the display encoder settings can be configured in this menu.
Figure
8-14 : WebEASY
®
- Display Encoder (+ENC option)
Output Tab:
This section allows the user to select encoded Output 1 or Output 2
Video Standard:
This dropdown allows the user to set the desired standard of the output encoder.
UDP Output Enable:
This dropdown allows the user to enable UDP TS output of the encoder.
UDP Output IP Address:
This field allows the user to set the multicast/unicast IP address of the UDP
output encoder.
UDP Output Port:
This field allows the user to define the specified port number or the UDP output
encoder.
UDP Output Interface:
The specified physical interface that UDP output encoder will stream from.
HLS Enable:
This field allows the user to enable the HLS (HTTP Live Streaming) output of the output
encoder.
HLS Playlist Size
: This field allows the user to set the number of chunks (segments) available to the
playlist at one time.
HLS Chunk Duration:
This field allows the user to set the time duration of each chunk (segment) in
seconds.
