MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 35
Scan Type:
This field allows the Interlace scan type to be selected. Possible options are Top field First
and Bottom field First.
Bitrate Mode:
This field allows the output video stream to be either encoded as a Constant Bit Rate
(CBR) or Variable Bit rate (VBR) format.
Video Bitrate:
This field allows the user to set the output video program bitrate (Kbps).
Audio Settings
This menu presents a list of all available settings for the output encoded audio stream (Figure
Figure
6-10 : Display Encoder\Audio settings Menu
Audio PID:
This field allows the user to set the Program ID of the output audio stream.
UDP Output Settings
This section allows the user to Enable/Disable the Encoder, Specify a Multicast/Unicast address of the
Encoded Stream, and specify which Physical network interface the stream the mosaic outputs to.
Figure
6-11 : UDP Output Settings
Enabled:
The
On/Off switch allows the user to enable/disable the output Encoder.
IP Address:
This field allows the user to specify a Multicast or Unicast address of the Output Encoder.
Port:
This field allows the user to specify the UDP port number of Multicast or Unicast Address.
Interface Selection:
eth0, eth1, eth2, or eth3 can be selected as the output interface for each encoded
output.
