MViP-II
IP Based Multi-Image Display & Monitoring Solution
Page - 36
Revision 1.2
HLS Settings
This configuration menu allows the user to enable the MViP-II mosaic outputs to be encoded into a web
formatted HLS (HTTP Live Streaming) stream. This can be used simultaneously with the UDP encoded
output stream. This stream is hosted internally on MViP-II.
Figure
6-12 : HLS Settings
Enabled:
The
On/Off switch allows the user to enables/disables the output Encoder.
Playlist Size:
This field allows the user to set the number of TS segments or “chunks” that are present in
playlist before playlist rolls over, the default value is 3.
Chunk Duration:
This field allows the user to set the
duration (s) of each TS segment or “Chunk”. Default
and recommended setting is 10 seconds.
6.1.2.8.
Network Settings
The network settings section allows the user to configure IP address, Netmask, Netmask preset, Gateway
and DNS Nameservers for all Ethernet ports. The user can also select Multicast interface from available
Ethernet interfaces.
This section indicates link speed, status, transmit, receive and MAC address for all Ethernet inputs.
6.1.2.9.
VLPro Thumbnail Client
This section allows the user to select the destination to send VLPro Thumbnail. The user is able to set the
Server URL, Port, and Size of the thumbnail and also allocate Bandwidth.
6.1.2.10. Network Proxy Settings
This menu allows a network proxy server to be set on the MViP-II. All HTTP requests will use the proxy
once it is configured.
