MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 11
Figure
3-8 : Selecting Firmware file to install
3.3.2. Upgrading MVIP-II Using WinSCP and Putty SSH
1. Download WinSCP and PuTTY software from their official websites.
2. Install it on the PC from where you can ping the MVIP unit. Run WinSCP, Host name = IP address
of MVIP, User name and Password = “
mvip
”, set protocol to
SCP
.
NOTE:
If the MVIP box is running Initial firmware, the “User Name” is “mvip” and “Password” is
“mvip”
Figure
3-9 : WinSCP Login
3. Copy the .efp file to the MVIP default directory.