![background image](http://html.mh-extra.com/html/evertz/mvip-ii/mvip-ii_user-manual_2445225019.webp)
MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 9
3.2.1. Multicast Interface
NOTE:
These steps must be followed in order to receive multicast to the interfaces
.
Specify which Ethernet port will receive multicast data.
•
Login to Configshell
•
Navigate to "Network", scroll down and select
Multicast Interface
•
Select an interface, select "Save and Apply"
o
Default interface is set to
eth1
3.3.
MVIP-II UPGRADE INSTRUCTIONS
3.3.1. Upgrading MVIP-II Using WEB
1) Click on “Install Firmware”